Spares and re-arming kits for life jackets. Replacement Co2 cylinders, pills, clips and bobbins for any lifejacket. Biggest stock and range in the UK!
United Moulders Automatic Rearming Kit 33g - June/2030 Expiry!
Now with 3+ year life!
This is the most common lifejacket service kit in the UK. Will fit brands such as Baltic, Typhoon, Marinepool, Kru, Wetline, Bluewave, Harveys, Seapro, Seago, Crewsaver (post 2009), Mullion, Parmaris, XM Quickfit, Plastimo, Helly Hansen, Spinlock.
This rearming kit will fit all 150N automatic lifejackets that use the UML-5, UML5, UML5i, UML-5i and UML pro sensor type inflator...
United Moulders Cartridge & Clip Set - June/2030 Expiry!
United moulders Cartridge and clip will fit all automatic lifejackets that use the UML-5, UML-5i and UML pro sensor type inflator. This will fit all united moulders automatic inflators from 1992 - present. We supply this part with the green manual pull cord retaining clip.
The white writing on your cartridge will show the expiry date, our example in the photo expires in November 2021.
This new...
United Moulders Rearming Kit 38g - June/2030 Expiry!
This rearming kit will fit all 170N, 175N, 180N automatic jackets that use The UML 5 United Moulders automatic inflator, with 38g CO2.
The kit includes one replacement head, a 38g CO2 cylinder and the green clip.
The white writing on your cartridge will show the expiry date, our current stock expires 04/2030.
Part no: 020650-U
Fits most adult 170N, 175N, 180N class lifejackets, eg Englands...
United Moulders Rearming Kit 24g - June/2030 Expiry!
For Bluewave childrens lifejackets, this rearming kit will fit all 150N automatic jackets that use the United Moulders automatic inflator, with 24g CO2 - and also some special lifejackets like the Englands Doctors lifejacket and the Snowbee fly fishing vest.
The kit includes one replacement head, one 24g CO2 cylinder, and a green clip.
The white writing on your cartridge will show the expiry...
Budget 33g Lifejacket Co2 Cylinder
33g co2 cylinder
1/2 inch UNF thread
Fits most adult gas lifejackets
United Moulders MK5i New Clip
This rectangular green clip is found on UK lifejackets with United Moulders automatic Inflators marked UML-5. The clip is 13mm wide.
These fit all lifejackets that use the yellow coloured United Moulders Inflators made from 2009 and on.
Not the kind of part your local chandler would stock!
If you are unsure which part your lifejacket accepts please email us before ordering!
United Moulders Cartridge & Clip Set - 10 Pack - June/2030 Expiry!
Save 20% when you buy 10 sets, usual price £129.99.
United moulders Cartridge and clip will fit all automatic lifejackets that use the UML-5, UML-5i and UML pro sensor type inflator. This will fit all united moulders automatic inflators from 1992 - present. We supply this part with the manual pull cord retaining clip.
The white writing on your cartridge will show the expiry date.
This...
Lifejacket CO2 cylinder - 33g
33g co2 cylinder - 1/2 inch UNF thread
Fits most adult gas lifejackets
United Moulders Rearming Kit 60g - June/2030 Expiry!
This rearming kit will fit all 275N automatic jackets that use the latest United Moulders automatic inflator, with 60g CO2.
The kit includes one replacement head, one 60g CO2 cylinder and a green clip.
The white writing on your cartridge will show the expiry date, our current stock expires 04/2030.
Our lifejacket cylinders are the very best available, they are zinc coated to reduce rust. Approx...
Halkey Roberts Super Bobbin and Lock Pin
One universal Halkey Roberts salt pellet bobbin and one green lock pin.
The kit includes one replacement bobbin, known as the 'superbobbin' which will fit all Halkey Roberts mechanisms. It's yellow in colour, your old part may have been red.
The expiry date can be found on the side of the Halkey Roberts bobbin. Halkey Roberts recommend replacing the super bobbin at regular intervals...
Crewsaver Crewfit Sport Automatic Re-arming Kit 33g - 2015 On
Current stock expires 05/2030.
Hammar M1A1 Operating Head - 2031 Expiry!
This replacement operating head will fit all automatic jackets that use the hammar M1A1 (hydrostatic) automatic inflator. (Sometimes mis-spelt as Hammer.)
The kit includes a replacement Hammar hydrostatic head, this part is used for replacing date expired operating heads. See video for fitting instructions.
These parts have a sell by / use by date - ours are guaranteed to be the freshest stock...
United Moulders Mk5 Old Standard Clip
This rectangular green clip is found on UK lifejackets with United Moulders automatic Inflators marked UML-5. The clip is 17mm wide.
These fit all lifejackets that use United Moulders Inflators made between 1992 and 2008.
Not the kind of part your local chandler would stock!
If you are unsure which part your lifejacket accepts please email us before ordering!
Halkey Roberts 'Alpha' Rearming Kit 33g
The new Halkey Roberts Alpha inflator features and all new 'dog clip' so called because it's easily identifiable. The clip has four legs, a head and body!
This kit fits automatic lifejackets with Black Alpha Halkey Roberts inflators, which can be found on UK lifejackets supplied after July 2008.
Very rare, not the kind of part your local chandler would stock!
These parts have a...
Halkey Roberts Auto Rearming Kit 33g
Current stock expires 06/2029.
Halkey Roberts Rearming Kit 38g
This rearming kit will fit all 150N automatic jackets that use latest Halkey Roberts automatic inflator, with 38g CO2.
The kit includes one replacement bobbin, known as the 'superbobbin' which will fit all Halkey Roberts mechanisms. Its yellow in colour, your old part may have been red. Also included is a 38g CO2 cylinder and the relevant clip.
Part no: 101003
Fits most adult 170N...
Hammar M1A1 Standard Rearming Kit 33g - 2031 Expiry!
This rearming kit will fit all 150N automatic jackets that use the hammar M1A1 (hydrostatic) automatic inflator. (Sometimes mis-spelt as Hammer or Hamar .)
The kit includes a replacement Hammar hydrostatic head, 33g CO2 cylinder fitted to new backing plate, fitting instructions and a fitting key.
*Note we are the only UK supplier who supplies the co2 cylinder fitted to a new backing plate, do...
Single Universal Fit Lifejacket Crotch Strap - Grey Thread
Single Lifejacket Crotch Strap - 100% British Made!
This universal lifejacket crotch strap is made from sturdy webbing with adjustable buckles and wil fit most lifejackets, automatic or manual. It loops round the back of the lifejacket and will loop round any buckle. Fully adjustable.
A crotch strap makes falling out of your lifejacket an impossibility, and is an essential lifejacket accessory.
Colour:...
Pro Sensor Rearming Kit 38g For Ergofit Offshore, Ergofit CS & PRO 190N Automatic Lifejacket
This rearming kit will fit the Ergofit Offshore 190N, Ergofit CS 190N and Ergofit PRO 190N automatic lifejackets that use the UML Pro Sensor automatic inflator, with 38g CO2.
The kit includes one replacement head and a 38g CO2 cylinder.
The white writing on your cartridge will show the expiry date.
Our lifejacket cylinders are the very best available, they are zinc coated to reduce rust....
Crewsaver 33g Cylinder
Genuine Crewsaver 33g Cylinder.
*From 2021 genuine Crewsaver cylinders are now shorter and wider than originally supplied. This reduces the chance of the cylinder rubbing on the collarbone. Contains exactly the same amount of gas.
33g co2 cylinder. Also referred to as 33gm 33gr 33 gram, co2 33g.
Fits all Crewsaver 150N Lifejackets.
Crewsaver lifejacket cylinders are zinc coated to reduce...
Hammar MA-1 60g life jacket rearming kit - 2030 Expiry!
This rearming kit will fit all 275N automatic jackets that use the hammar MA-1 type (hydrostatic) automatic inflator. This MA-1 kit will also fit any lifejacket that has a standard M1-A1 Hammar inflator .
The Hammar MA1 inflator can be recognised by the pull cord which is yellow and different to the standard hammar kit which has a red pull cord.
The kit includes a replacement Hammar hydrostatic...
Hammar MA-1 Operating Head - 2030 Expiry!
This replacement operating head will fit all 150N, 190N and 275N automatic jackets that use the hammar MA1 (hydrostatic) automatic inflator. It is not interchangeable with the A1 or M1A1 head, (the black back plates won't mate together).
The kit includes a replacement Hammar hydrostatic head, this part is used for replacing date expired operating heads.
These parts have a sell by / use by...
Crewsaver Fitment Hammar M1A1 Standard Rearming Kit 60g - 2031 Expiry!
This rearming kit will fit all 275N automatic jackets that use the Crewsaver hammar M1A1 automatic inflator.
The kit includes one replacement Hammar head, one 60g CO2 cylinder fitted to a new backing plate, fitting instructions and key.
*Note we are the only UK supplier who supplies the co2 cylinder fitted to a new backing plate, do not accept a kit without this part! Plus current stock has expiry...
Halkey Roberts Alpha Super Bobbin And 'Dog Clip'
This original Halkey Roberts part holds the salt bobbin and screws into the base of the inflator.
This is a specially imported genuine manufacturers' part and is very easy to fit in seconds. It has no shelf life.
This kit fits automatic lifejackets with Black Alpha Halkey Roberts inflators, which can only be found on UK lifejackets supplied after July 2008.
These parts have a sell by...
Hammar M1A1 Standard Rearming Kit 60g - 2031 Expiry!
This rearming kit will fit all 275N automatic jackets that use the hammar M1A1 automatic inflator.
The kit includes one replacement Hammar head, one 60g CO2 cylinder fitted to a new backing plate, fitting instructions and key.
*Note we are the only UK supplier who supplies the co2 cylinder fitted to a new backing plate, do not accept a kit without this part!
Our lifejacket cylinders are the...
United Moulders Manual Cap
This cap replaces the auto cap on the UML 5 and UML-5i inflator, as used on many UK lifejackets, simply converting the jacket from automatic to manual only firing.
It is a factory part and is very easy to fit in seconds. This blanking cap has no shelf life.
If you are unsure which part your lifejacket accepts please email us before ordering!
Crewsaver And CSR Pattern Automatic Rearming Kit 33g - 2009 On (L)
Current stock expires 03/2030.
Automatic Cartridge & Clip - fits all Crewsaver Crewfit Sport Automatic Lifejacket - 2015 On
This UML Cartridge and clip will fit all Crewfit Sport automatic lifejackets with UML-5i type inflator manufactured from 2015 on. Described as the 'MK5i inflator' model Crewsaver jackets with serial numbers starting with the letter L.
Images of lifejackets show compatability.
The white writing on your cartridge will show the expiry date.
These parts have a sell by / use by date -...
Crewsaver EXOLOK Tamper Sticker
Replacement EXOLOK tamper sticker
Hammar MA-1 33g Re-Arming Kit - 2030 Expiry!
This rearming kit will fit all 150N automatic jackets that use the hammar MA-1 type (hydrostatic) automatic inflator. It's also a universal fit part so will fit any lifejacket that has a standard M1-A1 Hammar inflator.
The Hammar MA1 inflator can be recognised by the pull cord which is yellow and different to the standard hammar kit which has a red pull cord. (Sometimes mis-spelt as Hammer.)
The...
Budget 33g Lifejacket Co2 Cylinder - 10 Pack
Ten pack of budget 33g co2 gas cylinders. Save 20% off the usual price of £7.99 each!
Fits 99% of British adult 150N class automatic/manual lifejackets, eg all of our 150N lifejackets, will also fit crewsaver, baltic, seago, XM, plastimo, sowester, remploy, kru, parmaris and spinlock lifejackets.
Part no: 106001JP
Approx length 13.50cm. Zinc coated to reduce corrosion.
Made in Japan
United Moulders Pro Sensor Elite Cartridge
Current stock expires 09/2029.
Crewsaver Fitment Hammar Auto Head - 2031 Expiry!
This replacement operating head will fit all 150N automatic jackets that use the hammar M1A1 (hydrostatic) automatic inflator. (Sometimes mis-spelt as Hammer.)
The kit includes a replacement Hammar hydrostatic head, this part is used for replacing date expired operating heads. See video for fitting instructions.
These parts have a sell by / use by date - ours are guaranteed to be the freshest...
USA 38g co2 cylinder - 3/8 inch UNF thread
38g co2 cylinder - 3/8 inch UNF thread
Compatable with most adult gas lifejackets made in USA
Lifejacket CO2 Cylinder - 24g
24g co2 cylinder.
Fits most childrens automatic lifejackets, eg our own Marinepool Kids Automatic 150N lifejacket .
Our lifejacket cylinders are the very best available, they are zinc coated to reduce rust.
Approx length 10.5cm.
Made in Japan.
Crewsaver Fitment Hammar M1A1 Standard Rearming Kit 33g - 2031 Expiry!
This rearming kit will fit all 150N automatic jackets that use the Crewsaver hammar M1A1 (hydrostatic) automatic inflator.
The kit includes a replacement Hammar hydrostatic head, 33g CO2 cylinder fitted to new backing plate, fitting instructions and a fitting key.
*Note we are the only UK supplier who supplies the co2 cylinder fitted to a new backing plate, do not accept a kit without this part!...
United Moulders Pro Sensor Rearming Kit 33g
Current stock is 2026 season and expiry date is 03/2030
Pro Sensor United Moulders Cartridge
Current stock is 2026 season and expiry date is 03/2030
Lifejacket CO2 Cylinder - 33g - 10 Pack
33g co2 cylinders - 1/2 inch UNF thread
Fits most adult gas lifejackets
United Moulders Pro Sensor Rearming Kit 38g
Current stock expiry date is 03/2030
Bluewave Adult Manual Lifejacket Service Kit - For Yellow Pull Cord - 2018 On
This Bluewave adult manual lifejacket service kit will fit all Bluewave lifejackets including the Sport range with the UML micro inflator - yellow toggle pull cord.
The kit includes one 33g CO2 cylinder and one curved green clip.
Bluewave lifejacket cylinders are zinc coated to prevent rust.
If you are unsure which reaming kit your lifejacket accepts please email us before ordering!
...
Halkey Roberts 'Alpha' Rearming Kit 60g
The new Halkey Roberts Alpha inflator features and all new 'dog clip' so called because it's easily identifiable. The clip has four legs, a head and body!
This kit fits automatic lifejackets with Black Alpha Halkey Roberts inflators, which can be found on UK lifejackets supplied after July 2008.
Very rare, not the kind of part your local chandler would stock!
These parts have...
United Moulders Manual Rearming Kit 33g
This rearming kit will fit all 150N manual jackets that use the Black UML or United Moulders manual inflator, with 33g CO2.
The kit includes one 33g CO2 cylinder and one curved green clip.
Our lifejacket cylinders are the very best available, they are zinc coated to reduce rust. Approx length of cylinder 13.5cm. Made in Germany.
These parts have a sell by / use by date - ours are guaranteed...
Hammar MA-1 38g Re-Arming kit - 2030 Expiry!
This rearming kit will fit all 180N automatic jackets that use the hammar MA-1 type (hydrostatic) automatic inflator.
The Hammar MA1 inflator can be recognised by the pull cord which is yellow and different to the standard hammar kit which has a red pull cord. (Sometimes mis-spelt as Hammer.)
The kit includes a replacement Hammar hydrostatic head, 38g CO2 cylinder fitted to new backing plate,...
Hammar M1A1 Standard Rearming Kit 38g - 2031 Expiry!
This rearming kit will fit all 190N automatic jackets that use the hammar M1A1 (hydrostatic) automatic inflator. (Sometimes mis-spelt as Hammer.)
The kit includes a replacement Hammar hydrostatic head, 38g CO2 cylinder fitted to new backing plate, fitting instructions and a fitting key.
*Note we are the only UK supplier who supplies the co2 cylinder fitted to a new backing plate, do not accept...
United Moulders Micro Manual Rearming Kit 33g
This rearming kit will fit all 150N manual jackets manufactured after January 2018 with an United Moulders micro manual inflator, with 33g CO2.
The kit includes one 33g CO2 cylinder and one micro manual green clip.
Our lifejacket cylinders are the very best available, they are zinc coated to reduce rust. Approx length of cylinder 13.5cm. Made in Germany.
Guaranteed to be the freshest stock...
United Moulders Elite 38g Service Kit
The Pro Sensor Elite® Automatic Inflator replaces the Pro Sensor® Automatic Inflator which is currently found on automatic Crewsaver lifejackets - including; ErgoFit+, ErgoFit, Crewfit 180N Pro/ HD/HF, Crewfit 150N Junior, Seacrewader 290N 3D, Crewfit XD (non-wipe clean) range arriving August 2019.
Being 13mm shorter and 4 grams lighter than the original Pro Sensor® Automatic Inflator...
Mullion Crotch Strap
Mullion Crotch Strap
A crotch strap makes falling out of your lifejacket an impossibility, and is an essential lifejacket accessory.
This crotch strap has the male-to-male feature and will fit Mullion Hi Rise, Mullion Mariner, Mullion Neptune and Mullion Compact lifejackets.
Colour: Black