Hammar

The Hammar H20 hydrostatic release unit is designed for liferafts from 6 up to 150 persons.\ Scratch off date upon installation. \ The Hammar H20 release unit consists of a double looped white rope line, a release mechanism and a Red Weak Link™ (breaking strength 2,2 ± 0,4kN). For smaller liferafts (from "" persons and outside SOLAS regulation) we recommend Hammar H20 Small Rafts model...

This is the hammar cylinder fitting plate for the model M1A1. Part no: 115 These parts have a sell by / use by date - ours are guaranteed to be the freshest stock available in the UK. If you are unsure which rearming kit your lifejacket accepts please email us before ordering!

This rearming kit will fit all 150N automatic jackets that use the hammar M1A1 (hydrostatic) automatic inflator. (Sometimes mis-spelt as Hammer or Hamar .) The kit includes a replacement Hammar hydrostatic head, 33g CO2 cylinder fitted to new backing plate, fitting instructions and a fitting key. *Note we are the only UK supplier who supplies the co2 cylinder fitted to a new backing plate, do...

This rearming kit will fit all 275N automatic jackets that use the hammar M1A1 automatic inflator. The kit includes one replacement Hammar head, one 60g CO2 cylinder fitted to a new backing plate, fitting instructions and key. *Note we are the only UK supplier who supplies the co2 cylinder fitted to a new backing plate, do not accept a kit without this part! Our lifejacket cylinders are the...

This rearming kit will fit all 180N automatic jackets that use the hammar MA-1 type (hydrostatic) automatic inflator. The Hammar MA1 inflator can be recognised by the pull cord which is yellow and different to the standard hammar kit which has a red pull cord. (Sometimes mis-spelt as Hammer.) The kit includes a replacement Hammar hydrostatic head, 38g CO2 cylinder fitted to new backing plate,...

This is the hammar cylinder fitting plate for the MA1. Part no: 116 These parts have a sell by / use by date - ours are guaranteed to be the freshest stock available in the UK. If you are unsure which rearming kit your lifejacket accepts please email us before ordering!

This replacement head fits in place of the automatic head on the hammar inflator, simply converting the jacket to manual only firing. It is a factory part and is fairly easy to fit in seconds. It has no shelf life. Comes complete with a key to aid in fitting. Part no: 020682 If you are unsure which part your lifejacket accepts please email us before ordering!

This rearming kit will fit all 275N automatic jackets that use the Crewsaver hammar M1A1 automatic inflator. The kit includes one replacement Hammar head, one 60g CO2 cylinder fitted to a new backing plate, fitting instructions and key. *Note we are the only UK supplier who supplies the co2 cylinder fitted to a new backing plate, do not accept a kit without this part! Plus current stock has expiry...