Spares and re-arming kits for life jackets. Replacement Co2 cylinders, pills, clips and bobbins for any lifejacket. Biggest stock and range in the UK!
Bluewave Adult Automatic Lifejacket Service Kit - For Red Pull Cord
This Bluewave adult automatic lifejacket service kit will fit all Bluewave lifejackets with the red toggle pull cord including the Lightweight, Harness and Sport range.
The kit includes one replacement automatic head, one 33g CO2 cylinder and one green clip 13mm wide.
Bluewave lifejacket cylinders are zinc coated to prevent rust.
If you are unsure which reaming kit your lifejacket accepts...
Bluewave Adult Manual Lifejacket Service Kit - For Yellow Pull Cord - 2018 On
This Bluewave adult manual lifejacket service kit will fit all Bluewave lifejackets including the Sport range with the UML micro inflator - yellow toggle pull cord.
The kit includes one 33g CO2 cylinder and one curved green clip.
Bluewave lifejacket cylinders are zinc coated to prevent rust.
If you are unsure which reaming kit your lifejacket accepts please email us before ordering!
...
Bluewave Adult Manual Lifejacket Service Kit - For Yellow Pull Cord - Pre 2018
This Bluewave manual automatic lifejacket service kit will fit all Bluewave lifejackets with the yellow toggle pull cord toggle, manufactured before 2018.
The kit includes one 33g CO2 cylinder and one curved green clip.
Bluewave lifejacket cylinders are zinc coated to prevent rust.
If you are unsure which reaming kit your lifejacket accepts please email us before ordering!
Bluewave Childs Automatic Lifejacket Service Kit - For Red Pull Cord
This Bluewave childs automatic lifejacket service kit will fit all Bluewave Kids lifejackets with the red toggle pull cord.
The kit includes one replacement automatic head, one 24g CO2 cylinder and one green clip 13mm wide.
Bluewave lifejacket cylinders are zinc coated to prevent rust.
If you are unsure which reaming kit your lifejacket accepts please email us before ordering!
Bluewave 'Offshore' Lifejacket Service Kit
This Bluewave adult automatic lifejacket service kit will fit all Bluewave 'Offshore' lifejackets with the red toggle pull cord.
The kit includes one replacement Salt bobbin, one 33g CO2 cylinder and one green clip.
Bluewave lifejacket cylinders are zinc coated to prevent rust.
If you are unsure which reaming kit your lifejacket accepts please email us before ordering!
Automatic Cartridge & Clip for Crewfit Sport Automatic Lifejacket - 2015 On
This UML Cartridge and clip will fit all Crewfit Sport automatic lifejackets with UML-5i type inflator manufactured from 2015 on. Described as the 'MK5i inflator' model jackets with serial numbers starting with the letter L.
The white writing on your cartridge will show the expiry date.
This new cartridge and clip is supplied with over two years service life.
These parts have a sell...
Crewsaver And CSR Automatic Cartridge & Clip - 2009 On
This Crewsaver CSR Cartridge and clip will fit all automatic lifejackets that use the UML-5 and UML-5i type inflator. Described as the 'MK5i inflator' model jackets with serial numbers starting with the letter L. This will fit all Crewsaver and CSR automatic lifejackets from 2009 - present.
The white writing on your cartridge will show the expiry date, our example in the photo expires in...
Crewsaver And CSR Pattern Automatic Rearming Kit 33g - 2009 On (L)
This rearming kit will fit all Crewsaver and CSR 150N automatic jackets produced from 2009 and on. Described as the 'MK5i inflator' model jackets with serial numbers starting with the letter L.
This pattern kit includes one replacement cartridge, one 33g CO2 cylinder and one green clip. The cartridge has a black colour.
Our lifejacket cylinders are the very best available, they are zinc...
Crewsaver Crewfit Sport Pattern Automatic Re-arming Kit 33g - 2015 On
This rearming kit will fit the Crewsaver Crewfit Sport 165N automatic jackets produced from 2015 and on. Described as the 'MK5i inflator' model jackets with serial numbers starting with the letter L.
This pattern kit includes one replacement cartridge, one 33g CO2 cylinder and one green clip. The cartridge has a black colour.
Our lifejacket cylinders are the very best available, they...
Crewsaver Crewfit Sport Pattern Manual Re-arming Kit 33g - 2015 On
This rearming kit will fit the Crewfit Sport 165N manual jackets that use the light grey Halkey Roberts manual inflator, with 33g CO2.
The kit includes one 33g CO2 cylinder and one green clip. Second picture shows the older type manual inflator, there are two different pull cords the other has a round red end.
Our lifejacket cylinders are the very best available, they are zinc coated to reduce...
Crewsaver Crewfit Sport Pattern Manual Rearming Kit 33g - 2021 On
This rearming kit will fit the Crewfit Sport 165N manual jackets that use the tan Halkey Roberts V87400M mini manual inflator and Crewsaver lifejackets with serial numbers beginning with the letters HR, with 33g CO2.
The kit includes one 33g CO2 cylinder and one green V87400M clip.
Our lifejacket cylinders are the very best available, they are zinc coated to reduce rust. Approx length of cylinder...
Crewsaver Fitment Hammar Auto Head - 2029 Expiry!
This replacement operating head will fit all 150N automatic jackets that use the hammar M1A1 (hydrostatic) automatic inflator. (Sometimes mis-spelt as Hammer.)
The kit includes a replacement Hammar hydrostatic head, this part is used for replacing date expired operating heads. See video for fitting instructions.
These parts have a sell by / use by date - ours are guaranteed to be the freshest...
Crewsaver Hammar Manual Conversion Kit
This replacement head fits in place of the automatic head on the crewsaver hammar inflator, simply converting the jacket to manual only firing.
It is a factory part and is fairly easy to fit in seconds. It has no shelf life. Comes complete with a key to aid in fitting.
If you are unsure which part your lifejacket accepts please email us before ordering!
Crewsaver Fitment Hammar M1A1 Standard Rearming Kit 33g - 2029 Expiry!
This rearming kit will fit all 150N automatic jackets that use the Crewsaver hammar M1A1 (hydrostatic) automatic inflator.
The kit includes a replacement Hammar hydrostatic head, 33g CO2 cylinder fitted to new backing plate, fitting instructions and a fitting key.
*Note we are the only UK supplier who supplies the co2 cylinder fitted to a new backing plate, do not accept a kit without this part!...
Crewsaver Fitment Hammar M1A1 Standard Rearming Kit 60g - 2029 Expiry!
This rearming kit will fit all 275N automatic jackets that use the Crewsaver hammar M1A1 automatic inflator.
The kit includes one replacement Hammar head, one 60g CO2 cylinder fitted to a new backing plate, fitting instructions and key.
*Note we are the only UK supplier who supplies the co2 cylinder fitted to a new backing plate, do not accept a kit without this part! Plus current stock has expiry...
Crewsaver 23g Cylinder
Genuine Crewsaver 23g Cylinder.
23g co2 cylinder. Also referred to as 23gm 23gr 23 gram, co2 23g.
Fits all Crewsaver Child Gas Lifejackets.
Crewsaver lifejacket cylinders are zinc coated to reduce rust. There cylinders have been tested and labelled by Crewsaver.
Quantity discounts available on 10+ cylinders, please email or call for details!
Crewsaver 33g Cylinder
Genuine Crewsaver 33g Cylinder.
*From 2021 genuine Crewsaver cylinders are now shorter and wider than originally supplied. This reduces the chance of the cylinder rubbing on the collarbone. Contains exactly the same amount of gas.
33g co2 cylinder. Also referred to as 33gm 33gr 33 gram, co2 33g.
Fits all Crewsaver 150N Lifejackets.
Crewsaver lifejacket cylinders are zinc coated to reduce...
Crewsaver 38g Cylinder
Genuine Crewsaver 38g Cylinder.
38g co2 cylinder. Also referred to as 38gm 38gr 38 gram, co2 38g.
Fits all Crewsaver 190N Lifejackets.
Crewsaver lifejacket cylinders are zinc coated to reduce rust. There cylinders have been tested and labelled by Crewsaver.
Quantity discounts available on 10+ cylinders, please email or call for details!
Crewsaver 60g Cylinder
Genuine Crewsaver 60g Cylinder.
60g co2 cylinder. Also referred to as 60gm 60gr 60 gram, co2 60g.
Fits all Crewsaver 275N and 290N Lifejackets.
Crewsaver lifejacket cylinders are zinc coated to reduce rust. There cylinders have been tested and labelled by Crewsaver.
Quantity discounts available on 10+ cylinders, please email or call for details!
Crewsaver EXOLOK Clip for UML model inflators
Exolok clip with sticker
Crewsaver Auto Standard Clip - Pre 2009
This rectangular green clip is found on Crewsaver automatic lifejackets that were produced up until the end of 2009 season. if your Crewsaver jacket was made after this date you need a '2009 on united moulders' clip.
Not the kind of part your local chandler would stock!
If you are unsure which part your lifejacket accepts please email us before ordering!
Crewsaver Ergofit Hammar Operating Head
Replacement Hammar Head suitable for Crewsaver Ergofit Lifejackets
Custom designed black pull cord
Supplied with fitting instructions and key
Fits Crewsaver Ergofit Hammar Lifejackets: Ergofit 190 OS, Ergofit 290N / Extreme / OC and the 2019 Ergofit +
Crewsaver Junior Auto Rearming Kit 23g Pre 2009
This rearming kit will fit all Crewsaver Junior childrens lifejackets that use the crewsaver standard automatic inflator, these jackets were produced up until the end of 2009 season. Described as the 'MK3A inflator' model jackets with serial numbers starting with the numbers 0 to 9 or the letter R.
If your Crewsaver jacket was made after this date you need a '23g united moulders'...
Crewsaver Sprayhood for Crewfit 165N Sport
Crewsaver Sprayhood for Crewfit 165N Sport\
The Crewsaver sprayhood srores in a pouch on your waistbelt to keep at hand for when the conditions deteriorate. Designed to fit over your gead and inflated lifejacket to make you more visible and to reduce the amount of spray you inhale.\
Genuine Crewsaver Standard Automatic Re-arming Pack 23g (L)
Replacement capsule and CO2 cylinder
Supplied with fitting instructions
Fits Crewsaver Standard Automatic Lifejackets
Check Lifejacket for size of cylinder required
For Serial Numbers starting with L
Crewsaver Standard Auto Rearming Kit 60g - Pre 2009
This rearming kit will fit all 275N automatic jackets that use the Crewsaver standard automatic inflator, these jackets were produced up until the end of 2009 season. Described as the 'MK3A inflator' model jackets with serial numbers starting with the numbers 0 to 9 or the letter R.
If your Crewsaver jacket was made after this date you need a '60g united moulders' kit. The second...
Halkey Roberts F1 Rearming Kit 33g Pro 1F
This rearming kit will fit all 150N automatic jackets that use the Halkey Roberts F1 automatic inflator, or Pro1F, which features a cylinder ready indicator and 33g co2.
The kit includes one replacement head, one 33g CO2 cylinder.
Our lifejacket cylinders are the very best available, they are zinc coated to reduce rust. Approx length of cylinder 14.25cm. Made in Germany.
These parts have...
Halkey Roberts F1 Rearming Kit 60g
This rearming kit will fit all 275N automatic jackets that use the Halkey Roberts F1 automatic inflator, which features a cylinder ready indicator and 60g co2.
The kit includes one replacement head, one 60g CO2 cylinder with a bayonet type fitting.
As required for the Marinepool Vario Premium 275 Lifejacket.
Our lifejacket cylinders are the very best available, they are zinc coated to reduce...
Halkey Roberts Rearming Kit 60g
This rearming kit will fit all 275N automatic jackets that use the latest Halkey Roberts automatic inflator, with 60g CO2.
The kit includes one replacement head, one 60g CO2 cylinder and a green clip.
Our lifejacket cylinders are the very best available, they are zinc coated to reduce rust. Approx length of cylinder 16.5cm. Made in Germany.
These parts have a sell by / use by date - ours are...
Halkey Roberts Standard Clip
This locking pin is found on UK lifejackets with Halkey Roberts Inflators supplied between around 1990 and 2009. Known as 840 85000 series v8500
It is the most common clip and can be used as an alternative to the more fragile original lock pin.
Not the kind of part your local chandler would stock!
If you are unsure which part your lifejacket accepts please email us before ordering!
Hammar MA-1 CO2 Cylinder Fitting
This is the hammar cylinder fitting plate for the MA1.
Part no: 116
These parts have a sell by / use by date - ours are guaranteed to be the freshest stock available in the UK. If you are unsure which rearming kit your lifejacket accepts please email us before ordering!
Hammar Manual Conversion Kit
This replacement head fits in place of the automatic head on the hammar inflator, simply converting the jacket to manual only firing.
It is a factory part and is fairly easy to fit in seconds. It has no shelf life. Comes complete with a key to aid in fitting.
Part no: 020682
If you are unsure which part your lifejacket accepts please email us before ordering!
Lifejacket CO2 Cylinder - 10g
10g co2 cylinder.
Fits specialist lifejackets such as the Baltic Hamble. Baltic softshell, and baltic Marstrand. Baltic part 2410.
Our lifejacket cylinders are the very best available, they are zinc coated to reduce rust.
Approx length 8.2cm.
Made in Germany.
Lifejacket CO2 Cylinder - 16g
16g co2 cylinder.
Fits old style lifejackets that may have two fitted, eg Beaufort lifejackets. Also fits the baltic henley vest, baltic part 2416.
Our lifejacket cylinders are the very best available, they are zinc coated to reduce rust.
Approx length 9cm.
Made in Germany.
Lifejacket CO2 Cylinder - 20g
20g co2 cylinder.
Fits some childrens automatic lifejackets, eg Seago Junior automatic lifejacket.
Our lifejacket cylinders are the very best available, they are zinc coated to reduce rust.
Approx length 10.5cm.
Made in Germany.
Lifejacket CO2 Cylinder - 24g
24g co2 cylinder.
Fits most childrens automatic lifejackets, eg our own Marinepool Kids Automatic 150N lifejacket .
Our lifejacket cylinders are the very best available, they are zinc coated to reduce rust.
Approx length 10.5cm.
Made in Japan.
Lifejacket CO2 cylinder - 33g
33g co2 cylinder - 1/2 inch UNF thread
Fits most adult gas lifejackets
Lifejacket CO2 Cylinder - 33g HR Bayonet Fitting
33g co2 cylinder with Halkey Roberts bayonet fitting.
Fits adult 150N class automatic lifejackets with the new Halkey Roberts singe indicator inflator, eg our own Marinepool Vario Premium Automatic 150N lifejacket.
Our lifejacket cylinders are the very best available, they are zinc coated to reduce rust.
Approx length 14.25cm.
Made in Germany.
Lifejacket CO2 Cylinder - 38g
38g co2 cylinder.
Fits most adult 170N and 180N class lifejackets, eg Englands Professional 170N, Remploy 170N, Ocean safety Commodore 170N, Crewsaver 180N.
Our lifejacket cylinders are the very best available, they are zinc coated to reduce rust.
Approx length 12cm.
Made in Austria.
Lifejacket CO2 Cylinder - 60g
60g co2 cylinder.
Fits most adult 275N class automatic lifejackets, for example ISPL Challenger Automatic 275N lifejacket.
Our lifejacket cylinders are the very best available, they are zinc coated to reduce rust.
Approx length 16.5cm.
Lifejackets.co.uk Generic Service TAG
Lifejackets.co.uk Generic Service TAG
Must be fitted on a press, so during service only.
Corrosion proof stainless, price includes fitting with a date indication label showing next service date. The label is replaced annually at service. Designed to last for the service life of the lifejacket.
Single Universal Fit Lifejacket Crotch Strap - Grey Thread
Single Lifejacket Crotch Strap - 100% British Made!
This universal lifejacket crotch strap is made from sturdy webbing with adjustable buckles and wil fit most lifejackets, automatic or manual. It loops round the back of the lifejacket and will loop round any buckle. Fully adjustable.
A crotch strap makes falling out of your lifejacket an impossibility, and is an essential lifejacket accessory.
Colour:...
Twin Life jacket Crotch Straps - Universal Fit
This lifejacket crotch strap has two straps one for each leg. It is made from sturdy webbing with adjustable buckles. A crotch strap makes falling out of your lifejacket an impossibility, and is an essential lifejacket accessory.
The colour is black and it is compatible with most automatic and manual lifejackets - please email us first to check compatability.
Bluewave Lifejacket Crutch Strap
Crutch strap for Bluewave life jackets. Retro fits to all Bluewave lifejackets manufactured from 2021.
Crutch Strap For Bluewave Lifejackets
Crutch strap for bluewave life jackets. Retro fits to all bluewave lifejackets.
Mullion Crotch Strap
Mullion Crotch Strap
A crotch strap makes falling out of your lifejacket an impossibility, and is an essential lifejacket accessory.
This crotch strap has the male-to-male feature and will fit Mullion Hi Rise, Mullion Mariner, Mullion Neptune and Mullion Compact lifejackets.
Colour: Black
Crewsaver Thigh Straps
Crewsaver Thigh Straps
Thigh straps make falling out of your lifejacket an impossibility, and is an essential lifejacket accessory.
These thigh straps can be fitted to most Crewsaver lifejackets. They give extra protection to the user by ensuring that the jacket does not ride up in the water and are particularly recommended for use by children.
Full fitting instructons are included.
Colour:...
4 x Bluewave Crutch strap
4 x Bluewave Crutch straps with black thread